|
|
| No Rules Power, NRP-HC1001, complies with the newest Intel standard ATX 12V V2.2 and SSI standard EPS 12V V2.91 simultaneously. The advanced features, including bead core protection fro PCI-e connectors, worry-free power failure detector and an over 80% efficiency rating, enable NRP-HC1001 to the stable and clean power. No Rules Power proves to be a spectacular performer, and full product line also provides various choices for different kinds of consumers. |
|
 |
 |
|
 |
|
 |
Perfectly balanced high Power with all detail connectors to fulfil every customer need, NRP-HC Series supports ATX 12V Vers. 2.2, EPS 12V Vers. 2.92, QUAD SLI Systems and AMD/INTEL QUAD CORE Platforms. |
|
Outstanding Performance (over 87% Efficiency), covering all features, cable management and nice outlook design match perfectly to PC Enthusiasts imaginations. |
|
With 140mm powerful but silent fan protecting from Overheating, easy to install and absolutely user-friendly, NRP-HC Series will run your PC stable and save cost by high efficiency and less power consumption. |
|
|
|
|
|
|
|  | |
 |
|
Multiple +12V Output
Enhanced +12V current capability broadens utilization possibilities. |
|
High Efficiency (up to 80%)
Optimal solution for lower energy consumption, noise, and heat.
|
|
Active Power Factor Correction (0.99 PFC)
Reduce line loss & power distortion.
|
|
Double Forward Circuit Design
Increase the reliability and efficiency of power. |
|
Universal AC Input(Full Range)
Plug & run safely anywhere in the world.
|
|
Smart and Silent Fan Control
Smart thermal control to balance noise and cooling. |
|
13.5(14)cm Cooling Fan
Maximum airflow, minimum noise level and extra durable life.
|
|
PCI-Express Connector
Support new PCI-E connectors for Video Card.
|
|
Patented Easy Swap Connector
Unplug connectors easily & quickly. |
|
Cable Management Swap Connector
Improve messy cable problem.
With cable management swap connector.
|
|
PC Power Supply Design Guide
Support ATX / BTX / EPS.
|
|
Multiple Platforms
Capability for Intel / AMD platforms.
|
|
Output Protection
Completed protection OVP / OCP / OPP / UVP / SCP / OTP. |
|
Mesh Sleeve Cable Design
Make cable management easier & airflow efficient.
|
|
Honey Comb Structure |
|
Japan Electric Capacity |
|
|
| | |
|
|
|
 |
Product Name |
NRP-HC1001 |
Product Number |
CPU-1000U-CO1 |
Power |
1000W |
Dimension |
200mm(L) x 150mm(W) x 86mm(H) |
Switches |
ATX Logic on-off additional power rocker switch |
Power Factor |
Active PFC (PF > 0.9) |
Cooling System |
140mm Fan, 2300RPM±10% |
Noise |
16 dBA at 1300RPM |
P.G. Signal |
100-500 ms |
Efficiency |
Up to 87% |
Hold-up Time |
16 ms |
INPUT |
Input Voltage |
100-240VAC |
Input Frequency Range |
47~63Hz |
MTBF |
120,000 hrs minimum (at 25℃) |
Input Current |
13A |
OUTPUT |
| |
Max/Min |
Regulation *1 |
Ripple & Noise *2 |
Output |
+12V1 |
20A/1A |
+3, -3% |
120mV |
500W |
+12V4 |
36A/1A |
+3, -3% |
120mV |
+3.3V |
30A/0.5A |
+3, -3% |
50mV |
500W |
+12V2 |
20A/1A |
+3, -3% |
120mV |
+12V3 |
36A/1A |
+3, -3% |
120mV |
+5V |
30A/0.5A |
+3, -3% |
50mV |
-12V |
0.8A/0A |
+10, -10% |
120mV |
9.6W |
+5Vsb |
3.5A/0A |
+3, -5% |
50mV |
17.5W |
Total Power |
1000W |
Peak Power |
1100W |
|
+5Vsb operate at 3.5A max load base on PS-ON mode.
If PS-OFF +5Vsb only operate at 3A max load.
Add 0.1µF capacitors across output terminal during ripple & noise test.
|
Environment |
Operating Temp. |
10℃ to 50℃ |
Storage Temp. |
-20℃ to 70℃ |
Operating Humidity |
20% to 90%, non-condensing |
Storage Humidity |
5% to 95%, non-condensing |
Protection |
|
DC Rail |
Trigger Point/Range |
Over Voltage Protection |
+3.3V trip point |
4.5 Vmax |
| +5.0V trip point |
7.0 Vmax |
| +12.0V trip point |
15.6 Vmax |
Over Current Protection |
+3.3V |
33A ~ 50A |
| +5.0V |
33A ~ 50A |
| +12V1 & +12V2 |
22A ~ 35A |
| +12V3 & +12V4 |
39A ~ 55A |
Under Voltage Protection |
+3.3V trip point |
2.0 Vmin |
| +5.0V trip point |
3.3 Vmin |
| +12.0V trip point |
8.5 Vmin |
Short Protection |
All output to GND |
|
| |
| |
| |
| |
| |
| |
|
|
